in 1939, the Patten Company is the country's leading innovative
designer and manufacturer of inflatable products for U.S. military,
rescue and commercial applications. Our state-of-the-art R&D, along
with three generations of experience, makes the Patten Company the
mainstay of the industry."
PATTEN COMPANY PRODUCTS
Patten continues to develop new rescue and life saving technologies....
We design and
manufacture inflatable life rafts that hold from one to
fifty occupants. Our models include 1, 6, 8, 12, 20, 33,
46 and 50 person rafts. These are lightweight, meet or
exceed military and commercial spec’s.
Totally made in the USA!
Range in size from 14’ – 20’.
They are collapsible and come “bear boat” or fully
rigged to your spec’s
Review our commercial Dive Boat with the patented through-the-floor entry system.
The company has developed
several models specifically for the Special Forces
the line is called SPECWAR. From a low profile to
We design and develop other products for a multitude of applications...
1: New Technologies
New development Projects -
Heintzmann and Patten react to Sago Mine
The life curtain for mine emergencies
Camper Top for
Recreational and Military Applications
ALL ARE AVAILABLE IN SEVERAL PACKAGES FOR
MILITARY AND COAST GUARD AIRCRAFTS
33 Person Wing Well
6 Person Raft -Designed
and custom packaged for the HH-60 and HH-65 Helicopters, HU-25
Falcon, and HC-144 CASA aircrafts.
The 46 Person
Reversible Raft- Will fit into a C-310 wing
8, 12, and 33 person life rafts-
Folded up in storage case:
Wide X 9’-0” Long X 7’-6” High
Why rent a truck for small jobs and then tent it?
With the new Patten Fumigation Vault you can go anywhere and in
minutes have the vault ready to use.
Air tight integrity. Opens at both ends.
Openings are sealed by means of a tight closing zipper and a
continuous velcro cover flap. The unit has two separate parts:
The air frame and the enclosure. All seams in the frame and
enclosure are heat sealed for air-tight integrity.
The small, lightweight package inflates in less than 5
minutes with the electric pump.
• The air frame is completely air tight and will stay erect for
approx. 4 weeks without having to add air.
• The pump is a high volume blower type that will inflate the
frame to approx. 3.5 P.S.I. in less than
• The fabric for the frame is a 26 OZ./SQ. YD. co-polymer and
comes with a 1 year warranty against manufacturing defects.
• The enclosure is an 18 OZ/SQ. YD. vinyl on a polyester base
• The enclosure comes attached to the inflatable frame with
webbing/velcro straps. There is no assembly. It is easily
detached for cleaning or replacement.
• The opening for the chemical fumigator is 10” diameter and has
an 18” sleeve with a triple folding velcro closure.
• There are two doors. One is large enough to drive a small car
through and the other is for personal entry and exit. They both
have tight sealing YKK coil zippers and an external cover flap
that is sealed with velcro.
• The frame is equipped with tent tie-down loops for staking
down in high wind conditions. Under normal conditions sand bags
can be placed around the inside perimeter.
• Emergency repairs on the air frame can be done in as little as
3 min. with the sealing clamps that come with the package.
• We can adhere any logo to the front and sides.
The 15-foot dive boat in 3- to 4-foot seas at 26 mph with four people, rescue gear, and a 35 hp motor
5: Recreational Boats
D450 (14’), D500 (17’), D560 (19’)
Personnel Transport, Workboat and Special Ops Dive Craft
7: Life Support